English
简体中文
Español
Русский
日本語
Deutsch
Français
Português
Home
Products
Commercial water purifier
Household water purifier-Whole House Water Filter System
Water treatment equipment
Outdoor water purifier
Industrial water purifier system
Air Purifier
Water Softener System
Case
Case Example
Feedback
News
About Us
English
Home
Products
commercial water purifier household water purifier-whole house water filter system water treatment equipment industrial water purifier system air purifier water softener system
Case
case example
Feedback
News
About Us
en
简体中文 Español Русский 日本語 Deutsch Français Português
Water purification information
Home > Water purification information

What are the reasons for the pollution of pure water equipment?

Views : 65916
Update time : 2021-11-24 14:29:34
There are several explanations for the pollution of pure water equipment: the pure water source of this equipment is the effluent of urban tap water after ultrafiltration. The water quality is ideal, but some fungi reproduce by spores. Although municipal tap water has been chlorinated and disinfected before ultrafiltration, some fungal spores may be in a state of suspended animation and enter reverse osmosis. Reducing agent is added to the reverse osmosis inlet pipe to remove residual chlorine in the water. There is no oxidizing bactericide in the pipeline from the reverse osmosis feed water pump to the reverse osmosis outlet water, which creates good living conditions for other microorganisms such as anaerobic fungi, so that they can multiply rapidly in these parts.

The front-mounted safety filter of the pure water equipment is the filtering equipment before reverse osmosis, with a filtering accuracy of only 5m, which has a strong ability to intercept pollutants. When the intercepted material gathers together, it becomes an ideal environment for microorganisms to multiply. Other similar equipment also has many cases where foreign matter inside the safety filter affects the pure water equipment. Fungi-like substances enter the reverse osmosis body with the influent, and multiply inside the reverse osmosis, which affects the operation of the equipment.

1. Location selection of pure water equipment: The water softener must be placed on a firm level ground, and the distance from the drain is good. The distance from the boiler and other heat sources must be greater than 3m, and it is also forbidden to approach acidic liquids or gases. If additional water treatment equipment is needed, place should be reserved.

2. Regarding the location of the recovery salt tank and resin:

It should be placed as close to the exchange column as possible. In order to make full use of the salt solution, try to shorten the size of the salt-absorbing plastic tube.

3. About filling quartz sand and resin:

(1) To ensure uniform water distribution, try to spread 150~200mm high-quality quartz sand on the bottom of the exchange column.

Then fill with resin and check the length and suitability of the intermediate riser.
 
Previous :
Next :
Related News
Read More >>
Do you know what factors affect reverse osmosis desalination rate? Do you know what factors affect reverse osmosis desalination rate?
Sep .27.2024
Does your reverse osmosis equipment often wash the membrane, change the membrane? Does your reverse osmosis equipment often wash the membrane, change the membrane?
Sep .27.2024
Users reflecting their own purchase of reverse osmosis equipment frequently wash membrane, reverse osmosis membrane use life is short and other issues. Today Susan organized a compilation of reverse osmosis equipment for reference, welcome to exchange, correction.
Do you know what you should do when the water purification equipment has a low water output rate? Do you know what you should do when the water purification equipment has a low water output rate?
Sep .26.2024
Today, Susan will give you a detailed answer to this question: Under normal circumstances, the phenomenon of low water output rate and high voltage of water purification equipment is mainly due to It is caused by instrument readings, temperature, inlet water conductivity, potential water side pressure, pressure difference, membrane element attenuation, membrane element pollution, untimely maintenance, etc.
Do you know the difference between ultrafiltration membrane and ro reverse osmosis membrane? And How to choose them? Do you know the difference between ultrafiltration membrane and ro reverse osmosis membrane? And How to choose them?
Sep .25.2024
Ultrafiltration membrane and 0 reverse osmosis membrane are both industrial filter membrane, in the production of industrial water filtration have a great role, but these two membrane elements are different in many ways. Understand the difference between the two before you can make a better choice.
Xiamen Ouge Digital Technology Co., Ltd
en
简体中文 Español Русский 日本語 Deutsch Français Português
Susan Susan
Susan
Susan Huang